Caesium capture by POCO CZR-2 Graphite on the penning-type H- VESPA source at ISIS

4 Sep 2018, 11:00
25m
Oral H– and D– sources for fusion, accelerators and other applications 5th Session

Speaker

Mr Tiago Morais Sarmento (ISIS Neutron Source)

Description

The standard ISIS Penning-type H– ion source operates with plasma and beam duty cycles of 4% and 1.25%, respectively, at 50 Hz repetition rate. It uses pulsed hydrogen injection, whereas cesium (Cs) is injected continually from an external oven. The oven is usually operated at around 160 °C, which is a compromise between high H– output, long-term plasma stability and low spark rate. Neutral Cs escapes the ion source between plasma pulses and must be trapped. On the ISIS operational source, a refrigerated ‘cold box’ is used to trap Cs vapor, however up to 40% beam-loss occurs on this bulky assembly. A vessel for extraction and source plasma analyses (VESPA) has demonstrated improved beam transport with the cold box removed, albeit at a higher un-trapped Cs flux. Therefore a new system is being trialled on the VESPA involving POCO CZR-4 graphite used as a Cs getter. Four blocks with a mass totalling 200 g are positioned downstream of the ion source on a mounting frame, such that they face the source directly with a large combined surface area. The blocks were designed in ANSYS for sufficient thermal isolation to permit in-vacuum bake-out at up to 800 °C. A suite of three quartz crystal microbalances (QCMs) detect Cs flux at various positions in the vacuum vessel. The flux is measured at a range of graphite heating powers to ascertain the gettering efficiency vs. temperature. In general, they work best around room temperature so are a true passive Cs trap, effective for any ion source facility which uses Cs. Initial results are presented comparing the Cs flux measured using QCMs to the Cs0 and Cs+ optical emission intensities as a function of Cs oven temperature. This allows a comparison between the amount of Cs present inside the pulsed plasma and the time-integrated Cs flux escaping between plasma pulses, which is subsequently captured. These quantitative Cs measurements and trapping schemes are important for long-term operation of a Penning source with twice the linear dimensions (the ‘2X source’), which has been demonstrated to emit a substantially higher Cs flux through its larger beam emission aperture.

Primary author

Mr Tiago Morais Sarmento (ISIS Neutron Source)

Co-authors

Dr Dan Faircloth (STFC) Mr John MacGregor (STFC) Mr Mark Whitehead (STFC) Dr Olli Tarvainen (STFC) Mr Rob Abel (STFC) Dr Scott Lawrie (STFC) Mr Trevor Wood (STFC)

Presentation Materials